Single-component, acrylic elastomeric anti-carbonation coating used with BC Anti Carbo Primer; provides deep concrete penetration, water repellency, and long-term protection against carbonation and weathering. 20 kg.
BC Anti-Carbo Primer is a single-component, ready-to-use silane–siloxane penetrating primer designed to protect reinforced concrete, bridge decks, pavements, parking structures, and exposed surfaces against chloride intrusion, carbonation, moisture ingress, atmospheric contaminants, oils, and fuel spills.
Is a two-component, flexible protective coating based on hybrid epoxy–polyurethane resins, designed for long-term protection of concrete and masonry surfaces. The product combines the superior adhesion and hardness of epoxy with the flexibility and UV resistance of polyurethane.
BC Coat EPU-400 is a two-component, solvent-free epoxy coating system designed for lining and waterproofing potable water retaining structures. The system consists of Part A (Epoxy Resin) and Part B (Hardener) supplied in pre-measured quantities.
BC Coat Protect - part of BCI's protective & industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
Is a water-based, sodium silicate concrete surface hardener, dust proofer, and curing aid designed to penetrate deeply into cementitious substrates.
BC ECR Eps - part of BCI's protective & industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
BCI Primer 349 Two-component, medium-viscosity, high-performance epoxy primer designed to seal substrate porosity and enhance adhesion for epoxy and polyurethane coatings; can also be used as a scratch coat with graded quartz sand.
BCI Primer 349 Two-component, medium-viscosity, high-performance epoxy primer designed to seal substrate porosity and enhance adhesion for epoxy and polyurethane coatings; can also be used as a scratch coat with graded quartz sand.
Is a two-component, high gloss, aliphatic polyurethane coating that combines acrylic and aliphatic polyurethane properties. It provides durable chemical and weather resistance and outlasts conventional acrylic, alkyd, epoxy, polyester, and urethane finishes.
Is a two-component, aliphatic polyurethane coating with a durable matt finish. It combines acrylic and aliphatic polyurethane properties to provide excellent chemical and weather resistance.
Gypsum-based, spray-applied fire resistive material for interior structural steel protection, compliant with IBC requirements for buildings up to 22.9 m height. 20 kg bag.
Is a high-performance, film-forming and penetrating silane siloxane primer designed to stabilize porous concrete and masonry surfaces prior to the application of water-based protective coatings.
BC Line GRP White is a three-pack, high chemical-resistant vinyl ester lining with fiberglass reinforcement, ideal for tank and pipe interiors requiring superior resistance to acids and solvents. 20 kg set.
BC Line GRP Primer is a three-pack, vinyl ester–based primer with inert fillers and fiberglass reinforcement, offering excellent chemical resistance for steel and concrete surfaces in tank linings and harsh environments. 20 kg set.
Is a high-quality, non-woven glass fiber reinforcement mat manufactured from randomly oriented chopped glass filaments (approx. 50 mm) bonded together with either powder or emulsion binder.
BC Line GRP Resin is a three-pack, high chemical-resistant vinyl ester lining with inert fillers and fiberglass reinforcement for steel and concrete surfaces, ideal for tank and pipe linings requiring superior chemical resistance. 20 kg set.
Is a single-component, moisture-curing polyurethane coating that forms a seamless, elastic, and durable membrane. Ideal as a topcoat over BCI Polyurea systems and bonding layer for BCI HMP in bridge deck waterproofing.
BC Poxy Clear Resin 1000 LV is a modified, ultra-clear, low-viscosity epoxy resin designed for high-clarity applications including castings, coatings, laminates, adhesives, and decorative encapsulations.
BCI Primer 349 Two-component, medium-viscosity, high-performance epoxy primer designed to seal substrate porosity and enhance adhesion for epoxy and polyurethane coatings; can also be used as a scratch coat with graded quartz sand.
BC Epoxy Primer 350 is a two-component, solvent-free, low-viscosity epoxy primer designed to penetrate deeply into concrete substrates, improving adhesion and surface integrity.
Two-component, metallic zinc-rich epoxy primer, 2 kg set, 8 m²/L at 50 µm, one coat², for durable corrosion protection of steel substrates.
Is a cement-based primer concentrate designed to regulate substrate absorption and enhance bonding for thin-coat finishing renders and decorative coatings. It equalizes surface porosity, improves adhesion, and extends open time of finishing products.
BCI Primer 349 Two-component, medium-viscosity, high-performance epoxy primer designed to seal substrate porosity and enhance adhesion for epoxy and polyurethane coatings; can also be used as a scratch coat with graded quartz sand.
BC PU Clear - part of BCI's protective & industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
Is a two-component polyurethane-based adhesion promoting primer specially designed for use with BC liquid-applied membrane systems. It is used when the maximum overcoating interval has been exceeded or when strong bonding is required between existing substrates and new polyurethane coatings.
Is a high-performance, single-component liquid polyurethane tack coat designed to provide excellent adhesion, flexibility, and waterproofing support for polyurethane, polyurea, and protective coating systems.
BC PU Topcoat - part of BCI's protective & industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
High-performance, hot-applied road marking compound, for durable, skid-resistant, and retro-reflective markings on asphalt and primed concrete, providing long-term visibility under heavy traffic conditions.
BC Seal Primer Two-part epoxy primer/sealer with excellent adhesion to concrete and steel, providing a durable base for chemically resistant coatings and toppings. 30 kg.
— One-component, water-based acrylic sealer, 20 kg, offering fast-drying, stain-resistant, and water-blush-resistant protection without solvent odors.
High-performance, solvent-based acrylic polymer sealer, 6–10 m²/L per coat, for exterior architectural concrete, exposed aggregate, and decorative cementitious surfaces, providing clear, UV-resistant, non-yellowing protection and enhanced natural luster.
BC Stone Protection High-performance, solvent-based acrylic polymer sealer, 6–10 m²/L per coat, for exterior architectural concrete, exposed aggregate, and decorative cementitious surfaces, providing clear, UV-resistant, non-yellowing protection and enhanced natural luster.
One-component, water-based acrylic sealer, for fast-setting, stain-resistant, and water-blush-resistant protection of concrete and masonry surfaces without objectionable solvent odors.
One-component, non-yellowing acrylic copolymer sealer, 20 L pack, coverage approx. 2.8 m²/L at 100 µm (two coats), for clear, fast-drying protection and color enhancement of BC Micro Cement.
