Construction chemicals manufactured in Saudi Arabia

Saudi-made waterproofing chemicals, bituminous membranes, liquid coatings and roof systems for basements, tanks and roofs. TDS and project support from BCI.

Spray and cold-applied polyurea coatings for roofs, tunnels, pools, decks and industrial waterproofing across Saudi Arabia and the GCC.

Saudi-made polyurethane foam, spray foam, sandwich panel and insulation systems for roofing, cold stores and industrial building envelopes.

Epoxy flooring, PU mortar, self-leveling and traffic-deck systems for factories, warehouses, parking areas and commercial floors.

Protective coatings, epoxy primers, anti-carbonation finishes and corrosion-control systems for concrete, steel and façades.

Concrete repair mortars, epoxy putties, non-shrink grouts and EN 1504-aligned protection systems for structural repair works.

Tile adhesives, tile grouts, epoxy grouts, marble adhesives and anchoring products for wet areas, pools, façades and interiors.

Construction sealants, joint fillers, flexible tapes and expansion-joint systems for façades, roofs, floors, wet areas and concrete.

Concrete admixtures, superplasticizers, curing compounds, release agents, cleaners and construction aids for ready-mix and site works.

BC 715 Injection Grout is a two-component, low-viscosity polyurethane resin system for the elastic sealing of cracks and voids in concrete and masonry, in both wet and dry conditions.

BC Aluminum-Faced Flexible Flashing is a self-adhesive, multi-layer waterproofing tape reinforced with an aluminium surface for superior weather and UV resistance. It seals joints, roofs, ducts and penetrations durably while conforming easily to irregular surfaces.

BC 237 is a two-component, solvent-free, 100%-solids, spray-applied pure-polyurea waterproofing coating (1 kg/m² at 1 mm; 420 kg kit) for seamless, permanently elastic, crack-bridging protection on concrete and metal substrates, with excellent chemical and abrasion resistance.

BC 238 AL is a 100%-solids, fast-curing, two-component, UV-stable aliphatic pure-polyurea system, specially formulated for excellent colour stability and resistance to discolouration under continuous UV exposure.

BC 601 Foam System is a two-component flexible polyurethane foam system composed of BC 601 Polyol and BC 768 Isocyanate.

BC 6534 Isocyanate is a high-reactivity component formulated for hybrid-polyurea systems, ensuring rapid curing and strong film build with excellent adhesion, durability and chemical resistance for demanding waterproofing and protective-coating applications.

BC Epoxy SL 140 (dark grey) is a 100%-solids, high-performance self-levelling coating for concrete. It can be applied as a neat or aggregate-filled system, or over reinforced systems.

BC Floor 1000 SL is a two-component, solvent-free, pigmented epoxy self-smoothing floor system (15 kg set, 0.8 kg/m² at 500 µm, one coat) for seamless, durable and easy-to-clean flooring.

BC Anti Carbo Finish is a single-component, acrylic elastomeric anti-carbonation coating used with BC Anti Carbo Primer. It provides deep concrete penetration, water repellency and long-term protection against carbonation and weathering. Supplied in 20 kg.

BC Anti-Carbo Primer is a single-component, ready-to-use silane–siloxane penetrating primer that protects reinforced concrete, bridge decks, pavements, parking structures and exposed surfaces against chloride intrusion, carbonation, moisture ingress, atmospheric contaminants, oils and fuel spills.