BC Anti Carbo Finish is a single-component, acrylic elastomeric anti-carbonation coating used with BC Anti Carbo Primer. It provides deep concrete penetration, water repellency and long-term protection against carbonation and weathering. Supplied in 20 kg.
BC Anti-Carbo Primer is a single-component, ready-to-use silane–siloxane penetrating primer that protects reinforced concrete, bridge decks, pavements, parking structures and exposed surfaces against chloride intrusion, carbonation, moisture ingress, atmospheric contaminants, oils and fuel spills.
BC Coat EPU is a two-component, flexible protective coating based on hybrid epoxy–polyurethane resins for the long-term protection of concrete and masonry, combining the adhesion and hardness of epoxy with the flexibility and UV resistance of polyurethane.
BC Coat EPU 400 is a two-component, solvent-free epoxy coating system for lining and waterproofing potable-water-retaining structures, consisting of Part A (epoxy resin) and Part B (hardener) supplied in pre-measured quantities.
BC Coat Protect is part of BCI’s protective and industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
BC Coat SHF is a water-based, sodium-silicate concrete surface hardener, dust-proofer and curing aid that penetrates deeply into cementitious substrates.
BC ECR Eps is part of BCI’s protective and industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
BC Epoxy Primer 349 is a two-component, medium-viscosity, high-performance epoxy primer that seals substrate porosity and enhances adhesion for epoxy and polyurethane coatings; it can also be used as a scratch coat with graded quartz sand.
BC Epoxy Primer 349 30 is a two-component, medium-viscosity, high-performance epoxy primer that seals substrate porosity and enhances adhesion for epoxy and polyurethane coatings; it can also be used as a scratch coat with graded quartz sand.
BC Finish Glossy is a two-component, high-gloss aliphatic polyurethane coating that combines acrylic and aliphatic polyurethane properties, providing durable chemical and weather resistance that outlasts conventional acrylic, alkyd, epoxy, polyester and urethane finishes.
BC Finish Matt is a two-component aliphatic polyurethane coating with a durable matt finish, combining acrylic and aliphatic polyurethane properties for excellent chemical and weather resistance.
BC Fire Proof 5 GP is a gypsum-based, spray-applied fire-resistive material for the interior protection of structural steel, compliant with IBC requirements for buildings up to 22.9 m in height. Supplied in 20 kg bags.
BC Fix Primer is a high-performance, film-forming and penetrating silane–siloxane primer that stabilises porous concrete and masonry surfaces prior to the application of water-based protective coatings.
BC GRP Line (white) is a three-pack, high-chemical-resistance vinyl-ester lining with fibreglass reinforcement, ideal for tank and pipe interiors that require superior resistance to acids and solvents. Supplied as a 20 kg set.
BC GRP Line Primer is a three-pack, vinyl-ester-based primer with inert fillers and fibreglass reinforcement, offering excellent chemical resistance for steel and concrete surfaces in tank linings and harsh environments. Supplied as a 20 kg set.
BC GRP Matt is a high-quality, non-woven glass-fibre reinforcement mat made from randomly oriented chopped glass filaments (approx. 50 mm) bonded with either a powder or an emulsion binder.
BC GRP Resin is a three-pack, high-chemical-resistance vinyl-ester lining with inert fillers and fibreglass reinforcement for steel and concrete surfaces, ideal for tank and pipe linings that require superior chemical resistance. Supplied as a 20 kg set.
BC MC Urethane is a single-component, moisture-curing polyurethane coating that forms a seamless, elastic and durable membrane — ideal as a topcoat over BCI polyurea systems and as a bonding layer for BCI HMP in bridge-deck waterproofing.
BC Poxy Clear Resin 1000 LV is a modified, ultra-clear, low-viscosity epoxy resin for high-clarity applications including castings, coatings, laminates, adhesives and decorative encapsulations.
BC Poxy Primer 349 is a two-component, medium-viscosity, high-performance epoxy primer that seals substrate porosity and enhances adhesion for epoxy and polyurethane coatings; it can also be used as a scratch coat with graded quartz sand.
BC Epoxy Primer 350 is a two-component, solvent-free, low-viscosity epoxy primer that penetrates deeply into concrete substrates, improving adhesion and surface integrity.
BC Poxy Zinc Rich 859 is a two-component, metallic zinc-rich epoxy primer (2 kg set, 8 m²/L at 50 µm, one coat) for durable corrosion protection of steel substrates.
BC Prime CB 100 is a cement-based primer concentrate that regulates substrate absorption and enhances bonding for thin-coat finishing renders and decorative coatings. It equalises surface porosity, improves adhesion and extends the open time of finishing products.
BC Primer 349 is a two-component, medium-viscosity, high-performance epoxy primer that seals substrate porosity and enhances adhesion for epoxy and polyurethane coatings; it can also be used as a scratch coat with graded quartz sand.
BC PU Clear is part of BCI’s protective and industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
BC PU Primer 810 is a two-component, polyurethane-based adhesion-promoting primer for use with BC liquid-applied membrane systems — applied when the maximum overcoating interval has been exceeded or when strong bonding between existing substrates and new polyurethane coatings is required.
BC PU TC is a high-performance, single-component liquid polyurethane tack coat that provides excellent adhesion, flexibility and waterproofing support for polyurethane, polyurea and protective-coating systems.
BC PU Topcoat is part of BCI’s protective and industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.
BC Road Mark is a high-performance, hot-applied road-marking compound for durable, skid-resistant, retro-reflective markings on asphalt and primed concrete, providing long-term visibility under heavy traffic.
BC Seal Primer 175 is a two-part epoxy primer/sealer with excellent adhesion to concrete and steel, providing a durable base for chemically resistant coatings and toppings. Supplied in 30 kg.
BC Sealer Matt is a one-component, water-based acrylic sealer (20 kg) offering fast-drying, stain-resistant and water-blush-resistant protection without solvent odours.
BC Stone Protection is a high-performance, solvent-based acrylic polymer sealer (6–10 m²/L per coat) for exterior architectural concrete, exposed aggregate and decorative cementitious surfaces, providing clear, UV-resistant, non-yellowing protection and enhanced natural lustre.
BC Stone Protection WB is a high-performance, water-based acrylic polymer sealer (6–10 m²/L per coat) for exterior architectural concrete, exposed aggregate and decorative cementitious surfaces, providing clear, UV-resistant, non-yellowing protection and enhanced natural lustre.
BC Tec Acrylic is a one-component, water-based acrylic sealer for fast-setting, stain-resistant and water-blush-resistant protection of concrete and masonry surfaces, without objectionable solvent odours.
BC Tec Sealer 201 is a one-component, non-yellowing acrylic copolymer sealer (20 L pack, approx. 2.8 m²/L at 100 µm over two coats) for clear, fast-drying protection and colour enhancement of BC Micro Cement.
