Protective coatings for concrete, steel and facades

Protective coatings, epoxy primers, anti-carbonation finishes and corrosion-control systems for concrete, steel and façades.

BC Anti Carbo Finish is a single-component, acrylic elastomeric anti-carbonation coating used with BC Anti Carbo Primer. It provides deep concrete penetration, water repellency and long-term protection against carbonation and weathering. Supplied in 20 kg.

BC Anti-Carbo Primer is a single-component, ready-to-use silane–siloxane penetrating primer that protects reinforced concrete, bridge decks, pavements, parking structures and exposed surfaces against chloride intrusion, carbonation, moisture ingress, atmospheric contaminants, oils and fuel spills.

BC Coat EPU is a two-component, flexible protective coating based on hybrid epoxy–polyurethane resins for the long-term protection of concrete and masonry, combining the adhesion and hardness of epoxy with the flexibility and UV resistance of polyurethane.

BC Coat EPU 400 is a two-component, solvent-free epoxy coating system for lining and waterproofing potable-water-retaining structures, consisting of Part A (epoxy resin) and Part B (hardener) supplied in pre-measured quantities.

BC Coat Protect is part of BCI’s protective and industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.

BC Coat SHF is a water-based, sodium-silicate concrete surface hardener, dust-proofer and curing aid that penetrates deeply into cementitious substrates.

BC ECR Eps is part of BCI’s protective and industrial coating range, manufactured in Saudi Arabia. Download the technical data sheet for full specifications.

BC Epoxy Primer 349 is a two-component, medium-viscosity, high-performance epoxy primer that seals substrate porosity and enhances adhesion for epoxy and polyurethane coatings; it can also be used as a scratch coat with graded quartz sand.